Holybro Pixhawk 6X Pro
$ 619 – $ 759
Description
| Key Design Point | |
| High-performance ADIS16470 Industrial IMU with high accelerometer dynamic range (±40 g), perfect for accurate motion sensing in demanding UAV applications | |
| All New advanced durable vibration isolation material with resonance frequency in the higher spectrum, ideal for industrial and commercial drone applications | |
| Triple redundant IMU & double redundant barometer on separate buses | |
| High performance STM32H753 Processor | |
| Modular flight controller: separated IMU, FMU, and Base system | |
| Safety-driven design incorporates sensors from different manufacturers and model lineups | |
| Independent LDO powers every sensor with independent power control. | |
| Ethernet interface for high-speed mission computer integration | |
| Temperature-controlled IMU board, allowing optimum working temperature of IMUs | |
| All new Vibration Isolation Design | |
| This new vibration isolation design uses a custom-formulated durabile silicone-based isolation material in place of the traditional foam design. Backed by extensive R&D and testing, it offers optimal IMU damping characteristics with resonance frequency in the higher spectrum, perfect for industrial and commercial drone | |
| Specification | |
| FMU Processor: STM32H753 | 32 Bit Arm® Cortex®-M7, 480MHz, 2MB flash memory, 1MB RAM |
| IO Processor: STM32F103 | 32 Bit Arm® Cortex®-M3, 72MHz, 64KB SRAM |
| On-board sensors | Accel/Gyro: ADIS16470 ±40g, Vibration Isolated, Industrial IMU |
| Accel/Gyro: IIM-42652 ±16g, Vibration Isolated, Industrial IMU | |
| Accel/Gyro: ICM-45686 with BalancedGyro™ Technology ±32g, Hard Mounted | |
| Barometer: ICP20100 | |
| Barometer: BMP388 | |
| Mag: BMM150 | |
| NXP EdgeLock SE050 Plug & Trust hardware secure element | |
| Voltage Ratings: | Max input voltage: 6V |
| USB Power Input: 4.75~5.25V | |
| Servo Rail Input: 0~36V | |
| Current Ratings: | Telem1 output current limiter: 1.5A |
| All other port combined output current limiter: 1.5A | |
| Dimensions | Flight Controller Module: 38.8 x 31.8 x 30.1mm |
| Standard Baseboard: 52.4 x 102 x 16.7mm (Aluminum) | |
| Mini Baseboard: 43.4 x 72.8 x 14.2 mm | |
| Weight | Flight Controller Module: 50g |
| Standard Baseboard: 72.5g (Aluminum) | |
| Mini Baseboard: 26.5g | |
Additional information
| Weight | 0.28 kg |
|---|---|
| Dimensions | 15 × 10 × 7 cm |
| Baseboard Version | Standard V2A, Standard V2B, Mini, FC only |
| Power Module | PM02D, None |
Be the first to review “Holybro Pixhawk 6X Pro”
Reviews
There are no reviews yet.